Cambelts / Timing belts

We offer either full cambelt services or just straightforward cambelt changes. Below are all the pricing options detailing what is carried out on and how much each option will cost. At the bottom of the page some common questions and queries are answered. If you can’t find your answer here please do not hesitate to give us a call.

All prices include VAT at 20%

 

 

All 1.4 Turbo and Non Turbo Engines (Mito / Giulietta)

We recommend 70k or 4/5 Years as per Alfa Romeos service schedule.

Parts Used

Price (inc labour and VAT)

Cambelt, tensioner and idler £305.00

Cambelt, tensioner and idler.
Waterpump and system bleed.

£360.00

 

 

All 1.6 & 1.8 T-Spark Engines

Alfa Romeo recommend that the Cambelt is changed every 36,000 miles or 3 years, whichever is soonest.

Parts Used

Price (inc labour and VAT)

Cambelt, tensioner and idler £380.00

These options are only relevant if one of the above options is chosen

Waterpump and system bleed £80.00
Variator supply and fit

Please enquire as these are currently longer available from Alfa. We have limited stock.

 

 

All 2.0 T-Spark and 2.0 JTS Engines

Alfa Romeo recommend that the Cambelt is changed every 36,000 miles or 3 years, whichever is soonest.

Parts Used

Price (inc labour and VAT)

Cambelt and tensioner and idler.

£420.00

 These options are only relevant if one of the above options is chosen

Waterpump and system bleed £80.00

Variator supply and fit

Please enquire as these are currently longer available from Alfa. We have limited stock.

 

 

All 1750 TBi Engines (159 / Brera / Giulietta QV) - The later 4C engined 240bhp Giulietta is £495 due to using a different waterpump and taking longer due to the alternator bracket needing to be removed.

We recommend 40,000 miles or 4 years, whichever is soonest.

 

Parts Used

Price (inc labour and VAT)

Cambelt, tensioner and idler £380.00

Cambelt, tensioner and idler. Waterpump and system bleed.

£455.00

Giulietta - 4C Engined (240bhp - TCT Gearbox)

Cambelt, tensioner and idler. Waterpump and system bleed.

£520.00

4C - Cambelt, tensioner and idler. Waterpump and system bleed. 

£650.00

 

 

All 1.6, 1.9, 2.0, 2.2 & 2.4 JTD Engines (Giulia and Stelvio included)

Alfa Romeo recommend that the Cambelt is changed every 72,000 miles or 5 years, although we have seen many fail before this interval and strongly recommend it is changed every 60,000 miles or 4 years, whichever is soonest.
It is also strongly advised to change the waterpump too.

Parts Used

Price (inc labour and VAT)

147, 156, GT, Mito and Giulietta

Cambelt, tensioner and idler

£350.00

159 and Brera

Cambelt, tensioner and idler. 

£380.00

Giulia / Stelvio 2.2 JTD - all BHPs

Giulia £525.00

Stelvio £595.00

 These options are only relevant if one of the above options is chosen

Waterpump and system bleed £70.00

 

 

2.5, 3.0 & 3.2 V6 Engines

Alfa Romeo recommend that the Cambelt is changed every 72,000 miles or 5 years, although we have seen many fail before this interval and strongly recommend it is changed every 60,000 miles or 4 years, whichever is soonest.
It is also strongly advised to change the waterpump and idler pulleys too.

Parts Used

Price (inc labour and VAT)

Cambelt and tensioner only £450.00
Cambelt, tensioner and 2x idler pulleys £750.00

Cambelt, tensioner, waterpump (metal impeller) 2x idler pulleys.

£920.00

 

 

2.2 JTS & 3.2 JTS

Both the 2.2 and 3.2 JTS engines have cam chains fitted. These are designed to be fitted for life although we do see some chains stretch over time. This can be for a number of reasons including poor maintenance and lack of oil changes so the best thing you can do for your JTS engined Alfa Romeo is change the engine oil as often as you can. We advise very 6000 miles.

If the chain does stretch an engine light will illuminate and when plugged in to the correct diagnostic equipment the relevant fault code will be present if it is timing chain related.

On the 2.2 JTS engines we always check the balance chain and also recommend an oil and filter change. Some gaskets and an oil jet may be required but we can only confirm exactly what is needed once your engine is stripped.

Engine / Parts Used

Price (inc labour and VAT)

2.2 JTS - complete timing chain kit
£650.00

3.2 JTS - these have three chains and are far more

complicated - please enquire

POA

 

 

All prices quoted can be subject to change without prior notice due to unforeseen changes in parts and consumables costs. We do try our very best to make sure all prices are as up to date as possible.

 

Why is it so important to change my cambelt?
Failure to do so within the recommended mileage / time schedule will result in the cambelt breaking, causing internal engine damage resulting in expensive repair costs.

What damage is caused if my cambelt fails?
Waterpumps, idler pulleys and tensioners can be damaged if a cambelt fails, if not the cause themselves. 
Inlet valves and exhaust valves can make contact with the pistons causing them to bend.
In some cases the pistons can even become damaged.
The forced contact between the valves and pistons can cause flat spots to occur on the bottom end bearings leading to engine failure at a later date.

How often should I change my cambelt and should I always change the waterpump at the same time?
Alfa Romeo recommends every 36,000 miles or 3 years (whichever is soonest) for all T-Spark engines and the same for 2.0 JTS engines. It is not always necessary to change the water pumps on the T-Spark and JTS engine but we will always inspect the waterpumps on these engines and advise accordingly although they are not a known ‘problem’ area. The later JTS engines in the 159/Brera are all chain driven.

For all V6 (not inc 159/Brera) engines they recommend 72,000 miles or 5 years although we strongly recommend that it is changed every 60,000 miles or 4 years (whichever is soonest) as we have seen so many fail over the years well before the 72,000 mile / 5 year mark. We also strongly advise that when changing the cambelt on the V6’s that the idler pulleys and waterpumps are always changed with the cambelt as these are often the cause of premature failure.

JTD engines are much the same as the V6’s. Alfa Romeo recommend 72,000 miles or 5 years but again we strongly advise that it is changed along with the water pump every 60,000 miles or 4 years due to waterpumps failing before the 5 year or 72k mark.

Why always change the balance shaft belt and tensioner on 2.0 engines?
This is necessary as if the balance shaft belt fails; it can often get caught up within the cambelt causing damage to the cambelt itself or other timing components.

What is a variator?
The variator is attached to the inlet cam and changes the cam timing to provide optimum performance. They are fitted to all T-Spark engines and 2.0 JTS engines. When these are faulty the make a rattling sound on start up.